Need help?Do you have a question about the Sartorius Talent TE212 and is the answer not in the manual?
Mandatory service course completion for personnel servicing Sartorius Competence balances/scales.
Instructions for activating BPI mode and deactivating write-protection.
Procedure for resetting write-protect and guidelines for replacing the main PCB.
Methods for adjusting off-center load and span on balances/scales.
Procedure for restoring factory settings and resetting the SBI mode.
Step-by-step instructions for connecting the BPI adapter to the balance/scale.
Connecting equipment and completing the BPI mode activation sequence.
Warning about setting write-protect and returning to SBI mode after BPI use.
Reasons why zero-point offset adjustment is necessary for strain-gauge load receptors.
Procedure for adjusting zero-point offset using a digital voltmeter and specific connections.
Method for adjusting off-center error by filing a thin part on the load receptor.
Two methods for span adjustment: using service software or manual calibration.
Steps for manual span adjustment using menu items and calibration weights.
Steps for adjusting off-center error using a 3-point measurement and adjustment screws.
Safety warning regarding working on an opened balance/scale with voltage present.
Detailed steps for performing a 3-point measurement to determine off-center loading error.
How to adjust screws to correct positive or negative deviations in off-center error.
Technique for adjusting off-center error by filing thin places on the upper guide.
Caution regarding filing adjustments and checking largest errors first.
Using service software to adjust linearity after span adjustment.
Procedure for backing up data using service software before replacing the main PCB.
Steps for replacing the main PCB and reprogramming necessary values.
To Next Page
General