25
* = only for GD-, GE-models
** = only for TE models
1
) = not for models with a readability of 0.1 mg
o) = Model-dependent factory setting
Menü 7 Print with Application Programs
7 1 Line format of printout
7 1 1 Without data ID Codes
7 1 2 o With data ID Codes
7 2 ISO/GLP-compliant printout
7 2 1 o Off
7 2 2 For calibration/adjustment only
7 2 3 Always on
7 3 Printout time
7 3 1 o 24-h format
7 3 2 12-h format
Menü 8 Extra Functions
8 1 Menu Access Function
8 1 1 o Parameter settings alterable
8 1 2 Parameter settings read only
8 2 Universal Switch for Remote Control
8 2 1 key c
8 2 4 key t
8 2 5 o key r
8 2 6 key v
8 2 8 key t
8 3 Power-on mode for balance/scale
8 3 1 Off/on (battery shuts off automatically
after 3 min)
8 3 2 o Stand.by/on
Menu 9 Reset Menu to Factory Settings
9 - 1 Restore
9 - 2 o Do not restore
Also resets SBI mode
Caution: Before resetting the menu, note down the
menu settings
To Next Page
Loading...