20
Anz-001F.eps
Anz-002F.eps
Balance/Scale Operating Menu
Accessing the Balance/Scale Operating Menu and Changing the Settings
Accessing the Menu: e + t
– Turn the balance/scale off and then turn it on.
– Press t briefly while all display segments are lit.
– If “- 1” is displayed, the menu is locked (read-only).
Note: To unlock the operating menu, change the active menu setting from
menu item 8 - 1 - 2 to 8 - 1 - 1.
Selecting a Menu Item: „r and t
– Press the t key to change the selected number; the display scrolls from 1
to 9 and starts over again at 1
– Press the r key to change the cursor position (the cursor moves from the
1st to the 2nd to the 3rd position and then back to the 1st, etc.)
To Next Page
Loading...