Need help?Do you have a question about the Sartorius Talent TE64 and is the answer not in the manual?
General| Maximum Capacity | 64 g |
|---|---|
| Readability | 0.1 mg |
| Pan Size | 90 mm |
| Linearity | ±0.2 mg |
| Calibration | External |
| Display | LCD |
| Power Supply | AC Adapter |
| Capacity | 64 g |
| Weighing pan size | 90 mm |
| Repeatability | 0.1 mg |
Crucial prerequisite for servicing balances and scales, emphasizing required training.
Guidelines for warranty claims, seal removal, and returning defective units for repair.
Instructions for activating the BPI mode and deactivating write-protection for service.
Procedures for managing write-protection and replacing the main PCB.
Steps to access the operating menu and change settings on the balance.
Procedure for changing specific code settings for balance configuration.
Configuration settings for filter selection and stability range.
Procedure for resetting the balance menu to factory default settings.
Detailed steps for connecting the BPI adapter to the balance for service.
Procedure for activating the BPI mode and ensuring correct connection.
Procedure for adjusting the zero-point offset using a digital voltmeter.
Method for adjusting the off-center error, typically by filing a thin part.
Procedure for adjusting off-center loading error using adjustment screws.
Method for determining off-center loading error using a 3-point measurement.
Procedure for adjusting balance linearity using service software.
Procedure for reading data, replacing the main PCB, and reprogramming.
Lists common error codes, their causes, and recommended solutions.
To Next Page