Cleaning the Data Printer
!When cleaning the data printer, make sure that no
liquid enters the housing
!Do not use any aggressive cleaning agents (solvents or
similar agents).
§ Disconnect the power supply by unplugging the inter-
face cable (connecting the weighing instrument) from
the rear panel of the printer.
$ If you are using an external power supply, unplug
the AC adapter from the electrical outlet (mains supply)
§ Use only a cloth moistened with a mild detergent (soap)
to wipe down the printer housing
§ After cleaning, wipe down the printer with a soft,
dry cloth
13
To Next Page
Loading...
