Operation
The data printer has 2 function keys for
operation:
:
Line feed; advances the paper by one blank line.
:
Print measured value or begin automatic
printing
Printing a Measured Value from the Connected
Weighing Instrument
$ Advance paper to desired position, if necessary:
Press the key (repeatedly if desired), or press
and hold for continuous line feed
§ To print data, press the key
> A sample printout is shown here on the left
Configuration
Configuring the Operating Menu
Note:
The connected weighing instrument must be
configured for data communication with the
printer.
Configuring the Weighing Instrument’s Printer
Port
The following settings are configured in the
printer at the factory:
9600 baud, 8 bits, odd parity, one stop bit, hard-
ware handshake (CTS/DTR)
When the printer is turned on, these settings are
loaded in the printer’s memory (EEPROM) for use
during operation.
8
To Next Page
