sarvaria Multilift - User Manual

Need help?

Do you have a question about the sarvaria Multilift and is the answer not in the manual?

Summary

Standard Notations

Hazards and Warnings

Job Site Tools

List of Installation Steps

Installation Flow Chart

Step 1 Double-check Site Specifics

Step 2 Unpack and Verify Shipment

Step 3 Verify Cab Type (Handing)

Step 4 Position Lift

Step 5 Power Up Lift for Installation

Step 6 Anchor Lift to Pad;Floor

Step 7 Adjust Limit Switches (As Required)

Step 8 Install Landing Gate or Door

Step 9 Install Locks and Operators (As Required)

Step 10 Install Hall Calls (As Required)

Step 11 Wind Gate Spring Hinges

Step 12 Adjust Gate Closer (As Required)

Step 13 Permanently Install Battery (Batteries)

Step 14 Verify Operation

Step 15 Reverse Power Cord (If Required)

Step 16 Reverse Automatic Access Ramp (If Required)

Step 17 Disassemble;Reassemble the Acme Screw (If Required)

Before Leaving Job Site

Maintenance

Verification by Owner

Owner's checklist for verifying lift operation and safety devices. Performed every two months.

Verification by Technician Only

Technician's checklist for verifying lift operation, safety components, and electrical systems. Performed every six months.

Appendix A Reference Drawings

Hall Call - Flush Remote Drawings

Hall Call - Surface Remote Drawings

Hall Call - In Frame Drawings

Landing Gate Harness Drawings

Hall Call Only Gate Harness Drawings

Pro-Door Installation Method 1: Anchor Tube Installation (Drywall)

Pro-Door Installation Method 2: Anchored to Concrete

Pro-Door Installation Method 3: Angle Plate Connection (No Existing Walls)

Pro-Door Installation Method 4: Angle Plate Connection (Existing Walls)

sarvaria Multilift Specifications

General

Brand	sarvaria
Model	Multilift
Category	Lifting Systems
Language	English