4 MAGENTA SATEL
4. Configure the detector using jumpers and the potentiometer.
5. Close the detector enclosure.
6. Specifications
Supply voltage ................................................................................................... 12 V DC ±15%
Standby current consumption ........................................................................................... 5 mA
Maximum current consumption ........................................................................................10 mA
Relay contacts rated load (resistive) ............................................................... 40 mA / 16 V DC
Alarm signaling time.............................................................................................................. 2 s
Detection range...........................................................................................................up to 6 m
Environmental class according to EN50130-5 .........................................................................II
Operating temperature range...............................................................................-10°C...+55°C
Maximum humidity ..........................................................................................................93±3%
Enclosure dimensions ................................................................................... 26 x 112 x 29 mm
Weight.................................................................................................................................40 g
The declaration of conformity may be consulted at www.satel.eu/ce
SATEL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND
tel. +48 58 320 94 00
www.satel.eu
To Previous Page
