Need help?Do you have a question about the Satel PK-01 and is the answer not in the manual?
Power| supply voltage | 12 V DC ±15% |
|---|---|
| standby current consumption | 105 mA |
| maximum current consumption | 125 mA |
Operating Environment| maximum humidity | 93±3% |
|---|---|
| operating temperature range | -25 to +55 °C |
| environmental class according to EN50130-5 | III |
Output Ratings| bell output rating | 30 mA |
|---|---|
| alarm output rating | 30 mA |
| relay contacts rating (resistive load) | 2 A / 24 V DC |
Frequency| reader working frequency | 125 kHz |
|---|
Weight and Dimensions| weight | 297 g |
|---|---|
| enclosure dimensions | 47 x 158 x 24 mm |
Manual advises careful reading and warns against unauthorized modifications voiding warranty.
Explains the meaning of red, green, and yellow LED status lights for module and door status.
Details the function of the keypad keys for operation and programming the module.
Lists wire colors and their corresponding functions for electrical connections.
Describes methods for unlocking the door using identifiers or a request-to-exit button.
Explains how to permanently lock the door, requiring door status monitoring.
Details how to revert a blocked/unblocked door to its normal state.
Explains how to permanently unlock the door, requiring door status monitoring.
Step-by-step guide to changing user access codes for security.
Instructions for entering and navigating the module's service mode for configuration.
Lists the available functions within the service mode menu for configuration.
Procedure for safely exiting the service mode without losing changes.
Guide for adding new user codes or modifying existing ones.
Steps to remove a user's access code from the module.
Procedure for registering proximity cards for user access.
Steps to remove a registered user card from the module.
Sets access rights for users, including blocking/unblocking authority.
Configures how the door status sensor input is handled.
Configures the input for the request-to-exit function.
Sets the maximum duration the door can remain open after activation.
Defines the duration the door strike or lock remains active.
Sets conditions for reducing the relay operation time.
Controls the illumination of the keypad backlight.
Lists the default administrator code and other pre-programmed settings.
To Next Page
