Satel ETHM-1 Plus - User Manual

Ethernet communication module
ETHM-1 Plus
Firmware version 2.05 ethm1_plus_en 07/18
SATEL sp. z o.o.
ul. Budowlanych 66
80-298 Gdańsk
POLAND
tel. + 48 58 320 94 00
www.satel.eu

Summary

General

Field of application

Electronics Board

Setting address

4.1 Module connected to INTEGRA; INTEGRA Plus control panel

Explains how to set the module's address for INTEGRA/INTEGRA Plus panels.

4.2 Module connected to VERSA control panel

Specifies the address setting for connecting the module to a VERSA control panel.

Installation

Configuring the settings

6.1 Module connected to INTEGRA; INTEGRA Plus control panel

Details how to configure settings for the module when connected to INTEGRA/INTEGRA Plus panels.

6.2 Module connected to VERSA control panel

Details configuration methods for the ETHM-1 Plus module when connected to a VERSA control panel.

Filtering by IP address

Filtering by subnet

Remote programming; operating of control panel via module

7.1 GUARDX program

Outlines methods for establishing connections between GUARDX program and the control panel.

7.2 Web browser

Explains how to access and control the alarm system using a web browser interface.

7.3 INTEGRA CONTROL application

Introduces the mobile application for operating and configuring the alarm system.

Specifications

Satel ETHM-1 Plus Specifications

Power

supply voltage	12 V DC ±15%
standby current consumption	70 mA
maximum current consumption	80 mA

Operating Environment

environmental class	II
operating temperature range	-10 to +55 °C
maximum humidity	93±3%

Weight and Dimensions

dimensions	68 x 140 mm
weight	64 g