Satel ETHM-1 Plus - Macro Commands

SATEL ETHM-1 Plus 15
Fig. 9. DLOADX program: parameters and options of the virtual keypad available in GUARDX
program, web browser or mobile device.
6.1.6 Macro commands
The INTEGRA CONTROL application allows to control the alarm system by means of macro
commands, thus making it possible to quickly and easily run a number of different functions
by touching just a few keys. The macro commands can be defined in the DLOADX program
(“Structure” window “Hardware” tab “Keypads” branch [module name] branch
“GUARDX/INTEGRA CONTROL” item “Macro Commands” tab).
Defined macro commands can be automatically downloaded by the INTEGRA CONTROL
application after establishing connection with the module.
Macro commands can be loaded into the application without establishing connection with the
module. The file containing macro commands can be exported, and then saved to the mobile
device memory (to transfer the file, you can use a memory card or other solutions available