Satel ETHM-1 Plus - Remote programming; operating of control panel via module

28 ETHM-1 Plus SATEL
SMTP account
It is required to have an e-mail account so as to enter its parameters in the DLOADX
program for the purpose of e-mail messaging.
Mail server (SMTP) – address of outgoing mail server.
Server port – number of outgoing mail port.
User name – name of the e-mail account used for authorization by the SMTP server (login to
e-mail account).
Password – the password used for authorization by the SMTP server.
Encryption – you can define if and how the outgoing mail is encrypted:
none – outgoing mail is not encrypted.
STARTTLS – outgoing mail will be encrypted using the STARTTLS protocol.
SSL/TLS – outgoing mail will be encrypted using the SSL/TLS protocol.
Subject – subject of the e-mail message. It will be inserted in each e-mail message to be
sent.
Sender address – e-mail address which will be inserted in the outgoing e-mail message as
the sender address. If this field is blank, the name of e-mail account will be treated as the
sender address.
Fig. 14. DLOADX program: “SMTP account” window. The presented settings are just an
example.
7 Remote programming / operating of control panel via module
The module enables communication with the control panel over Ethernet. If the INT-GSM
module is connected to the ETHM-1 Plus module, the backup communication path is GPRS
(the module is identified as “ETHM+GSM”).
After three consecutive attempts to establish communication with the module using
an incorrect key, the module will stop responding for approx. 20 minutes to any
attempts to establish communication from the given IP address.
For information related to configuring the control panel by means of the DLOADX program,
please refer to the control panel programming manuals.