Manual code - MI400A00115 Revision Level 00 - 05/08/2020
16
Connectanelectricalsupplytotheplug(1).Makesurethat
the power line is protected by an appropriate differential
switchandmainswitches.
Usetheelectricaloutlet(2)toconnectanotherunit.
Turntheselectorswitch(3)in“ManualMode”.
Switchonthelightsusingtheswitches(4).
To turn off the lamps, turn the light switches (4)andthe
selectorswitch(3)toOFF.
Koble en el‐forsyningtil uttaket(1). Forsikre deg om at el‐
linjen beskyttes av en passende differentialbryter og av
hovedstrømbryter.
Brukel‐uttaket(2)foråkobletilenannenenhet.
Vribryteren(3)på“ManuellModus”.
Slåpålysetvedhjelpavbryterne(4).
Foråskruavlampene,vrilysbryterne(4)ogvelgeren(3)på
OFF.
Connectanelectricalsupplytotheplug(1).Makesurethat
the power line is protected by an appropriate differential
switchandmainswitches.
Usetheelectricaloutlet(2)toconnectanotherunit.
Turntheselectorswitch(3)in“LIGHTSENSOR”.
Setthelightsensor(5)toavaluebetweenmin.25andMax.
70.
Switchonthelightsusingtheswitches(4).
Whentheambientbrightness dropsbelowthepresetlevel
(expressedinLux),theLEDlightsturnonautomatically.
When the ambient brightness rises below the preset level
(expressedinLux),theLEDlightsturnoffautomatically.
Koble en el‐forsyning til uttaket (1). orsikre deg om at el‐
linjen beskyttes av en passende differentialbryter og av
hovedstrømbryter.
Brukel‐uttaket(2)foråkobletilenannenenhet.
Vribryteren(3)på“LIGHTSENSOR”.
Stillinnlyssensoren(5)påenverdimellommin.25ogmaks.
70.
Slåpålysetvedhjelpavbryterne(4).
Näromgivningensljusstyrkagårunderdetförinställda
värdet(uttrycktilux),tändsLED‐lampornaautomatiskt
Nårlysstyrkeniomgivelsenestigeroverdet
forhåndsinnstiltenivået(uttryktilux),slukkesLED‐lampene
automatisk.
ON
OFF
LIGHT SENSOR
MANUAL MODE
OFF
TIMER
LAMP
LIGHT
SENSOR
TIMER
ASTRONOMICAL
POWER INLET
230V OUTLET
LIGHT
SENSOR
MODE
LYSSENSORMODUS
MANUAL
MODE
MANUELL
MODUS
LIGHTINGTOWERUSE__BRUKAVLYSMASTEN
1
2
3
5
6
4