SL700 GNSS RTK System Getting Started
13
rinex. The log folder stores log information. The data format stored in the gnss folder is *.gns;
The data format stored in the rinex folder is a standard RINEX format data file. You can
connect to your computer using a randomly configured USB cable and use the USB disk to
copy static data to your computer.
Figure 2-3-2Static Data Storage
Notice: When the storage space inside and outside the receiver is less than
2MB, the data lamp (red light) fast flashes and then stops recording ,
meanwhile the existing data files will not be overwritten.
2.3.3Static data download
SL700 receiver file management using U disk storage, plug-and-play, direct drag-and-drop
download, do not need to download the management software. SL700 receiver can only
download static data by using U disk mode, and can not write to the SL700 receiver.
SL700 receiver can download data through U-disk, use Mini USB cable when downloading.
To Next Page
