SatLab SL800 - Schedule 1 - Factory Default Parameters; Schedule 2 Key Parts Information

`
35
Figure 5-7 Height measure plate
Schedule 1 - Factory default parameters
Default System parameters for Mobile station
Working mode RTK
Message Format RTCM (3.2)
Satellite elevation cut-off angle 10
GPS satellite enabled
BDS satellite enabled
GLONASS enabled
Static sampling interval 5 seconds
Static elevation cut-off angle of 10 degrees
Schedule 2 Key Parts Information
Motherboard Novatel OEM729 555 channel
Antenna miniaturized measurement of zero - phase antenna.
Antenna gain 51dB
Data board SLG20150010 [PCBA]