SatLab SL800 - Power Key Function

`
10
Power key function
Power key function: power on/off, work mode switch, power query, automatic setting of
the base station, and resetting of the motherboard.
Function
Action
Boot
Press power button for 1 second, all lights
come on and receiver boots.
Shut Down
Long press power button for 3 seconds, all
lights flash twice, release the button to turn
off.
Base Station setting
Receiver off, long press power button for 6
seconds, all lights flash twice, release the
button, the receiver will automatically set
Base Station mode.
Work Mode switch
Double click the power button to enter
Working Mode. Each double click will cycle
between Static and RTK mode.
Status Inquiry
Click power button, power light flashed red
to show power status.
Reset Motherboard
Receiver powered on, press and hold
power button for more than 6 seconds, all
three lights will flash, release button to
reset motherboard
Table 2.1 Power Key Function Details