Satlink WS-7009 - Page 20

19
English
Press
AB
key to switch Flashlight on/o.
• 12V
Press
AB
key to switch DC 12V output on/o.
Note: If the shell is no 12V interface, without this feature
• KB-BackLight
Press
AB
key to switch delay time of back light.
• Set Location
Press
AB
or OK to set location longitude o r
latitude.
Location: we can press AB to change the
city, then auto select longitude and latitude.
Longitude: we can use number key input
value then select west or east.
Latitude: we can use number key input
value then select south or north.
• Upgrade
Will update the file into the USB, then insert
the machine. Press OK to update interface,
use the direction key to select update file,
and press OK to update.
Warning: Please don’t turn power o or pull
out the USB, otherwise it will damage the
machine’s software, and can’t boot again.
• Factory Setting
Press AB key, then press OK to confirm factory reset.
NOTE: if you set factory setting, all the user settings and the database will be
reset.
• System Info
In the system setting, press INFO to check
the system version.