Satlink WS-7009 - DVB-T2 Scan Setup

11
English
3.3 DVB-T2
Select DVBS2, then press OK into the Scan
Setup.
3.3.1 COUNTRY SETTING
Press
AB
key to change the default country.
3.3.2 CHANNEL NO
Press
AB
key to change the channel number
3.3.3 FREQUENCY
Frequency of the current channel, input the value by using the number keys.
3.3.4 BANDWIDTH
Press
AB
key to change the bandwidth, we can select 5, 6, 7 or 8M.
3.3.5 MODE
Press
AB
key to change the DVB standard, we have there types including
T/T2/T+T2, you can select one you want.
3.3.6 BEEP TONE
Press
AB
key to switch beep tone. If we open the beep tone, the beep of
lock alarm will open when we enter into the search screen.
3.3.7 ANTENNA SETTING
Press
AB
key to change the antenna power, we have there types including
5V/12V/17V, you can select one you want.
3.3.8 ANTENNA SETTING
Press
AB
key to power on or o the antenna.