SATO CL408 - Power On; Normal;User Mode; Advanced Mode Settings and Adjustments; Print Test Labels

CL408/412
14
Thermal Head Assembly
Item # Part Number Description Qty
01 PA1772000 Head frame 1
02 MD4401021 Pan head screw 2
03 PA1772500 Head bracket 1
04 PA1771900 Plate (Ribbon adjust) 1
05 MD4300621 Pan head screw 2
06 PA1772300 Adjust plate (A) 1
07 MD4300621 Pan head screw 1
08 PA1771800 Head sub bracket 1
09 MD4300621 Pan head screw 2
10 PA1770600 Adjust plate (B) 1
11 PB2770300 Collar (4x6x7.2F) 1
12 MA0401021 Pan head screw 1
13 PB0770700 Shaft (Head adjust) 1
14 ND0020030 E-snap ring 2
15 PB2770100 Collar (4x6x8.7) 1
16 MD4401421 Pan head screw 1
17 PA1771500 Adjust plate 1
18 PL2720100 Adjust collar 1
19 MD4300821 Pan head screw 1
20 NA1040022 Plain washer 1
21 MD4300821 Pan head screw 1
22 PC0770100 Spring 1
23 PB0770600 Shaft (Head pressure) 1
24 PE1740100 Head pressure bracket 2
25 PE1740200 Head tension pin 2
26 PC1770200 Spring (head) 2
27 PA0740100 Pressure plate 2
28 ND0060030 E-snap ring 4
29 PE2770300 Collar (6x8x4F) 4
30 PB3770100 Roller (6x12x143) 2
31 PB0770300 Shaft (Support) 1
32 MD4300621 Pan head screw 2
33 PR7770600 Latch handle 1
34 NG2201230 Pin 1
35 PR7770700 Head pressure set 1
36 GH000531A Thermal head, CL408 only 1
37 MD4300621 Pan head screw 1
38 RH1770100 HDP cable 1
39 RH1770200 HDS cable 1
40 MD4300621 Pan Head Screw 1
41 GH000521A Thermal head, CL412 only 1