SATO CL608e - Page 8

Bi-Directional Communications ...................6-8
ENQ/ACK/NAK..........................6-9
Status Response.........................6-12
Accessory (EXT) Connector.....................6-18
Pin Assignments.........................6-18
Standard Operation .......................6-19
Repeat Print...........................6-20
Error Signals ..........................6-20
SECTION 6. TROUBLESHOOTING
Initial Checklist ...........................7-1
Using the IEEE1284 Parallel Interface ................7-1
Using the RS232C Serial Interface ..................7-3
Error Signals .............................7-4
APPENDICES
APPENDIX A: Optional Accessories
Label Rewinder, All Models ...................A-1
Label Cutter, All Models .....................A-2
Label Dispense Option ......................A-3
CL608e and CL612e .....................A-3
CL408e and CL412e .....................A-4
Memory Cards, All Models ....................A-7
CL608e and CL612e .....................A-7
CL408e and CL412e .....................A-8
Interface Cards, All Models ...................A-10
Calendar, All Models ......................A-10
SATO CL “e” Series Printers PN 9001074 Rev. B Page - v
Preface