SATO CL6NX - Page 16

CL6NX KITTING MANUAL
Modify the Cushion (Bottom-Front)
+DS & DS+REWIND model
Remove the Cushion piece
from Cushion (Bottom-Front)
• This small piece is not use
for +DS & DS+REWIND model,
please throw away it.
<Packing method>
1. Remove Small-piece from Cushion (Bottom-Front) ~with Dispenser & Dispenser +Rewind model
(1)
CUSHION
(BOTTOM-FRONT )
Cushion (Bottom-Rear)
Cushion (Top Front -R)
Cushion (Top Front -L)
Cushion (Top Rear)
DS KIT +RW MODEL
DS KIT MODEL
Page.14