SATO CL6NX - Features of the Product

CL6NX KITTING MANUAL
15. Connect the (0) Option-cable on (26) Relay-PCB
* Option-cable is printer-side items.
16. Connect Dispense-unit’s cable (Dispense Sensor-
cable to Relay-PCB
17. Attach (26), fix by (27) screw.
18. Attach (28)
19. Attach (29), fix by (30) screw.
(0)
OPTION CABLE
Dispense Sensor cable
(from Dispense Unit)
(28)
FROTN COVER
UNDER (LH)
(29)
DISPENSE UNIT
Reuse
(30)
PAN SCREW SW+WS
(MD4300828): 4pcs
KIT items
KIT items
(26)
RELAY-PCB
KIT items
(27)
PAN SCREW SW+WS
(MD3300622): 2pcs
KIT items
Torque : 3.5～4.5 Kg･cm
Torque : 7.0～8.0 Kg･cm
Page. 7
DS KIT +RW MODEL
DS KIT MODEL