Unit 4: Printer Configuration
CT4i Operator’s Manual
4-3
4.2 THE REAR PANEL
All of the printer cable connectors are located on the Rear Panel, as follows.
Fanfold-label Loading Slot
Remove this panel to route fanfold paper into the printer
Optional interface slot
This slot can be used to house an additional
optional interface card to supply a parallel,
bluetooth or WLAN interface connection.
Factory installed USB + RS232C Interface
This interface can be selected at the time of
purchase. You can also select USB + LAN
interface as the factory installed interface.
To Next Page
Loading...
