SATO CT400 - Two Standard Ports out of the Box

■ Two Standard Ports out of the Box
The new Ct4i series uses a unique plug-in interface design...with a new twist. The CT4i
printer comes with either USB and Serial RS232 Interface [CT4i Type 1] or USB and Internal
LAN [CT4i Type 2] built in as a standard.
Optional interfaces for CT4i Type 1 include an IEEE1284 Parallel Interface, WLAN
IEEE802.11g or Bluetooth interface card.
Standard In-Built Interface Type 1: USB + RS232C
Type 2: USB + LAN
Selectable Plug-in Interface Type1 only: IEEE1284, WLAN, Bluetooth
Cards options
The fl exible interface combinations allow easy integration into any application.
Below confi guration chart shows a comparison between CT4 and new CT4i:
RS-232C interface
USB interface
DC input
power terminal
(Power connector)
Interface board
The interface can be changed using
an optional interface board.
LAN interface
USB interface
I/F Cover
✔ available x not available Plug-in Interface Cards
IEEE1284 LAN Wireless LAN Bluetooth USB RS232C
(incl. LAN)
CT4-2
✔ ✔ ✔ x ✔ ✔
CT4i (USB + RS232C) ✔ x ✔ ✔ Standard Standard
CT4i (USB + LAN) x Standard x x Standard x
15
Type 2 USB + LAN interface
Type 1 USB + RS-232C interface