SATO SG112-ex - Substitution Font Settings and Usage Example

56
Substitution font settings and usage example 3.2.3
You can print by replacing the Windows system fonts with the product’s device fonts when defining
substitution fonts.
Use these fonts when you cannot select device fonts (they are not displayed) from the application
font list.
You can also replace them with the barcode and command fonts that you added.
Substitution font usage example
This section describes an example using substitution fonts.
Open [Devices and Printers], right-click the product, and select [Printer properties].
1.
Display the [Driver Settings] tab, select [Fonts], and then select [Add] > [Substitution]. 2.