9
Connecting via LAN cable
Power off the product.
1.
Connect the LAN cable to the product.
2.
Connect the LAN cable to the connector shown in the figure.
Connect the LAN cable according to your network environment.
3.
Configure the network settings.
4.
For details of the network settings, refer to "SG112-ex Operator Manual."
Connecting via RS-232C cable
Power off the product.
1.
Connect the RS-232C cable to the product.
2.
Connect the RS-232C cable to the connector shown in the figure.
Connect the RS-232C cable to the computer.
3.
Connecting via IEEE1284 cable
Power off the product.
1.
Connect the IEEE1284 cable to the product.
2.
Connect the IEEE1284 cable to the connector shown in the figure.
Connect the IEEE1284 cable to the computer.
3.
To Next Page
Loading...
