Copyright © 2020 Savant Systems, IncSavant Pro Remote Deployment Guide
009-1536-01 | 201030
10 of 16
7. Settings Menu
7.1. Reset Wi-Fi
If the SSID or password of the local network is changed the steps below describe how to update the Wi-Fi information to the new settings.
74˚
CLIMATE
FAMILY ROOM
1. From any room, scroll to the bottom of
the screen and open the Settings
screen by selecting the
Gear Icon.
About
Wi-Fi Information
Users
Brightness
Wake Sensitivity
SETTINGS
2. Select Wi-Fi Information from
the list in the Settings screen.
Network:
“<Network SSID>”
IP Address: <IP>
Strength 4/4 (-52db)
Channel: <ch#>
Frequency: 5GHz
CONFIGURE WI-FI
WI-FI
3. Select the Configure Wi-Fi button.
Are you sure you want to
reset your current Wi-Fi
configuration?
Tapping Reset will clear the
current network name and
passphrase. You will have to
re-select a Wi-Fi network and
enter a passphrase
BACK RESET
Reset WI-FI
Configuration
4. Select Reset.
The Remote will scan the area
and list all available networks.
Scroll through the list, select
the appropriate network, and
connect to that network with
the new credentials. Refer
to section 5.2 Add Remote
to Savant Host for more
information.
To Next Page
Loading...
