Copyright © 2020 Savant Systems, IncSavant Pro Remote Deployment Guide
009-1536-01 | 201030
5 of 16
2. Required Items
This Deployment Guide will guide the installer through the process of adding a Savant Pro Remote to a Savant Pro system. It is recommended that the
installer read this document in its entirety before beginning the deployment process.
Ensure that the items in the list below are available.
Savant Pro Remote and charging base (REM-1100 or REM-2000) .................................................................
Savant Host running da Vinci 8.7 or higher: .............................................................................................................
Savant Development Environment (SDE) MacBook .............................................................................................
(with da Vinci 8.7 or higher installed)
Ethernet network meeting Savant Requirements ..................................................................................................
(See Appendix A: Network Requirements)
3. Deployment Steps
Follow these steps to successfully deploy the Savant Pro Remote. Use the checklist to record items as they are completed.
1. Review System Diagram, Connections, and Additional Information ......................................................
System Overview
2. Install and Configure Pro Remote ........................................................................................................................
Install Remote
Add Remote to a Savant Host
To Next Page
Loading...
