SawStop 10” Industrial Cabinet Saw 81
No. Description Part No. Qty.
1 Table CB104 001 1
2 Rear Lock Down Screw for Insert CB104 002 2
N/A Extension Wing Assembly (complete) CB104 003 2
3 Cast Iron Wing CB104 004 2
4 M10x1.5x30 Hex Head Bolt CB104 005 6
5 M10.2x18.5 Lock Washers CB104 006 6
6 M10x25x3 Washers CB104 007 6
7 M10x1.5x25 Socket Head Set Screw CB104 008 2
8 Standard Insert Assembly (complete) CB104 009 1
9 Rear Leveling Screw CB104 010 2
10 M6x1x14 Front Leveling Screw CB104 011 2
11 Threading Insert CB104 012 1
12 M5x0.8x20 Front Lock Down Screw CB104 013 1
13 M6x1x8 Set Screw CB104 014 2
14 Cabinet CB104 015 1
15
Surge Suppressor: 200V - 240V CB104 276
1
Surge Suppressor: 415V - 480V CB104 277
16 Strain Relief Coupling CB104 017 1
17 Belt Access Door CB104 018 1
18 Belt Access Door Latch CB104 019 1
19 Belt Access Door Latch Screw CB104 020 4
20 Grommet for Cable Aperture CB104 021 1
21 Cover Plate for Tilt Rod Aperture CB104 022 1
22 M6x1.0x16 Phillips Head Screw CB104 023 2
23 Blade Wrench CB104 024 2
24 Wrench Bracket CB104 025 1
25 M8x1.25x10 Socket Head Bolt CB104 026 1
26 M8.2x15.4 Lock Washer CB104 027 1
27 Grommet for Terminal Box CB104 028 1
28 Terminal Block CB104 029 1
29 M5x0.8x20 Phillips Head Screw CB104 030 2
30 Equipment Ground Screw CB104 031 1
31 Terminal Box Cover CB104 032 1
32 3/16-24NCx1.4 Terminal Cover Screw CB104 033 1
33 M10x1.5x30 Hex Head Bolt CB104 034 8
34 M10.2 x 18.5 Lock Washer CB104 035 9
35 M10x25x3 Washer CB104 036 8
Cabinet and Table Assembly Parts List
To Next Page
Loading...
