SCAN 68 Series - Assembly; Additional Accessories; Loose Parts; Disposal of Packaging

13
6800000
PRODUCT REGISTRATION NUMBER
All Scan wood-burning stoves are provided with a product registration number. You will always need to quote this number when
contacting your dealer or Scan A/S.
The product registration number is located at the rear of the stove.
ADDITIONAL ACCESSORIES
¬ Small shaped floor plate in glass or steel ¬ High Top (Scan 68-13/14)
¬ Large shaped floor plate in glass or steel ¬ High Top (Scan 68-15/16)
¬ Storage door for the portal unit ¬ Heat accumulating stones for high top
¬ Connecting piece for inside flue pipe, 6" ¬ Wall mounting kit for Scan 68 with high top
¬ Adjustment key for height adjustment
LOOSE PARTS
¬ Glove ¬ Dekor ring for top outlet
¬ Connecting piece 6" ¬ 4 Screw M5 x 10 mm
¬ Seal ¬ 1 Pass Screw M5 x 10 mm (UK) - Please see instructions
DISPOSAL OF PACKAGING
Your Scan stove may come supplied with the following packaging:
Wood packaging
The wood packaging can be reused and after final use can be incinerated as a
CO
2
neutral
product or sent for recycling.
Polystyrene top Send for recycling or waste disposal
Foam Send for recycling or waste disposal
Plastic bags Send for recycling or waste disposal
Stretch/plastic film Send for recycling or waste disposal
ASSEMBLY
Type plate
Product registration number
Product registration number