26
1
2
1 2 3
3
The heat accumulating stones
are placed in the high top and
turned in place around the
chimney
The second stone is placed next
to the first stone so that they join
each other around the chimney
The rest of the stones are
placed in the same way
Fixing hole for fastening the safety wire in the high top
with rear outlet. (1)
Fixing hole for fastening the safety wire in the high top
with elbow pipe. (2)
HEAT-STORAGE STONE
Heat-storage stones are made from a special material with a high heating capacity. The stones are heated up during the firing
and gives off the heat again after the firing, which means that the stove stays warm for a longer time.
Firing with the vent open will give a quicker heating. Firing with the vent closed will extend the heating time of the stove.
(ACCESSORY)
To Next Page
Loading...
