23
B
FITTING NATURAL STONE
Scan 68-15 and Scan 68-16 are supplied with loose pieces of natural stone that are fitted to the sides of the stove.
Natural stone is made from a natural material and consequently its pattern and shape may vary.
Please note that the illustration shows a High Top, which can be purchased as an accessory.
Sealing strip
Marking hole
Trim the sealing strip supplied so that it
fits in between the two marking holes.
Fix the stove to the inside of the mark-
ing holes as shown above.
Fix the stones to the
stove and the deco-
rative grate and then
place the top plate
loosely on top.
PLEASE NOTE that the bottom damper handle
(match) should be moved to position B so there is
enough room to fit the stone at the bottom.
To Next Page
Loading...
