EasyManua.ls Logo

Scania OC16 - User Manual

Scania OC16
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
en-GB 2 831 273
Issue 3.0
Operator's manual
OC16 Gas Industrial engine
Important information
Serious risk of injury
When working on the engine, for example when adjusting drive belts and the clutch, or when changing the
oil, it is important not to start the engine. The engine could be damaged, but more importantly there is a
serious risk of injury.
Therefore, block the starting device and switch off the manual fuel cock when working on the engine. This
is especially important if the engine has a remote starter or automatic starting.
WARNING!
This warning symbol and text can be found next to those maintenance items where it is particularly impor-
tant to bear in mind the risk of injury.

Table of Contents

Other manuals for Scania OC16

Question and Answer IconNeed help?

Do you have a question about the Scania OC16 and is the answer not in the manual?

Scania OC16 Specifications

General IconGeneral
Engine ModelOC16
Displacement16.4 liters
AspirationTurbocharged
Fuel SystemCommon Rail
Cylinder ArrangementV
Power Outputup to 566 kW
Torque Outputup to 3, 500 Nm
Engine TypeDiesel

Summary

Environment and safety

Safety

Summary of safety precautions for operation and maintenance.

Safety precautions for running the engine

Fuel

Warnings about incorrect fuel quality causing malfunctions.

Hazardous gases

Safety advice for starting engine in ventilated areas.

Running

Risks approaching a running engine and need for guards.

Safety precautions for handling materials

Batteries

Warnings about oxyhydrogen gas and battery handling.

Safety precautions for maintenance

Switch off the engine

Importance of switching off the engine before maintenance.

Hot surfaces and fluids

Risk of burns from hot engine parts and fluids.

Cooling system

Coolant

Recommended coolant mixture and properties.

Changing the coolant and cleaning the cooling system

Procedure for draining and cleaning the cooling system.

Filling coolant

Procedure for filling the cooling system with coolant.

Electrical system

Gas safety and warnings

Precautions for working with flammable gas and electrical systems.

Batteries

Handling and charging batteries

Warnings and procedures for battery handling and charging.

Before starting

Pre-start checks and safety

Ensuring guards are in place before starting the engine.

Starting and running

Checks before first start

Items to check before initial engine startup.

Starting the engine

Procedures for starting the engine safely.

Running

Coolant temperature

Normal and alarm levels for coolant temperature.

Charge air temperature

Engine shutdown

Procedure for shutting down the engine correctly.

Maintenance

Lubrication system

Oil grade

Recommended engine oil grades and viscosity.

Checking the oil level

Steps to check engine oil level.

Changing the oil

Procedure for draining and refilling engine oil.

Cleaning the centrifugal oil cleaner

Steps to clean the centrifugal oil cleaner.

Renewing the oil filter

Procedure for replacing the engine oil filter.

Fuel system

Electrical system

Renewing the spark plugs

Steps to remove and replace spark plugs.

Other

Checking and adjusting the valve clearance

Procedure for checking and adjusting valve clearance.

Quality requirements for fuel

Preparing the engine for storage

Preparations for storage

Steps for preparing the engine for storage.

Technical data

Fuel system

Technical data for the fuel system.

Related product manuals