Scania OC16 - Fuel system; Cleaning the flame arrestor and throttle at the flame lock

Fuel system
OPM 320 en-GB 44
© Scania CV AB 2019, Sweden
Fuel system
Cleaning the flame arrestor
and throttle at the flame lock
This procedure applies only if pure biogas is
used as fuel.
IMPORTANT!
Read the safety precautions before starting work.
1. Detach the harness-to-component connector
from the throttle.
2. Remove the screws securing the throttle
bracket to the flame arrestor.
371 296
371 297