Scansonic D100 - Drc

8
● Full scan
1. It performs a station scan from channel 5A to 13F
2. Press “Scan” button to do “Full scan”
● Manual tune
1. Press the ‘Menu’ button to “Manual tune”;
2. Pressthe“Select”toconrmandtheDABradiowillstart“Manualtune”,
it will display on the screen;
3. Press“◄”and“►”keytoscrollthroughthefrequency;
4. The device can receive the stations automatic in the available frequency
band;
5. If the radio received station at that frequency channel, the radio will show
the stations. Then you can press “select” to enter the station list.
6. Press “Select” to select a desired station to listen to;
7. Repeat 1-6 for tune other Channel frequency
DRC
DynamicRangeControl(alsoknownasDRC)canmakequietersounds
easier to hear when your radio is used in a noisy environment. This function
is only available for the DAB.
DRC Off – No compression
DRC High – Maximum compression
DRC Low – Medium compression
Setting the compression to maximum will “boost” the quiet sounds, whilst
keeping the loudest sounds at their original level.