4. Safety instructions
Follow them to achieve best results and full benefit from your new
machine
The very good craftsman respects the tools with which he works. He
knows they represent years of constantly improved design. He also knows
that they are dangerous if misused.
This is the theme of a new safe-use program for stationary power tools.
The safety rules are based on approved practices in industrial and home
shops.
3. Ground all tools. If tool is equipped with
three-prong plug, it should be plugged into a
three-hole electrical
receptacle. If an
adapter is used to
accomodate a two-
prong receptacle,
the adapter wire
must be attached to
a known ground.
Never remove the third prong.
To Next Page
Loading...