Scantool SB 30 - Page 23

15. Maintain tools
with care. Keep
tools sharp and
clean for best and
safest
performance.
Follow instructions
for lubricating and
changing
accessories.
16. Disconnect tools
before servicing and
when changing
accessories such as
grinding wheels,
polishing mops,
grinding belts,
blades, bits, cutters,
etc.
17. Reduce the risk of
unintentional starting.
Make sure switch is in off
position before plugging in.
18. Use recommended
accessories. Consult
owner’s manual for
recommended
accessories. Use of
improper accessories
may cause risk of
injury to persons.