Scantronic 4601 User Manual

496368 Issue 1 1 of 12
4600
Installation and User Guide
Compatible Equipment
4601 Long range and short range pendant transmitters
4602 Hand held PA
4603 Programmable transmitter
4604 Contact transmitter
4605 Short range dual channel transmitter
4608 PIR
4609 Smoke detector
7150 Viper radio vibration detector (supplied by Weyrad Elec-
tronics).

Scantronic 4601 Specifications

General

Brand	Scantronic
Model	4601
Category	Security System
Language	English

Summary

Compatible Equipment

Introduction

Technical Specification

Electrical Specifications

Details electrical input, protection, battery backup, and auxiliary output.

Wiring Diagram

Programming

Initial Power Up

Enter Programming Mode

Steps to enter programming mode using access codes and panel cover.

Programming Commands

Default Settings

Lists factory default access codes for engineering and user.

Engineering Program Commands

Zone Definitions

Defines the function of each zone (1-8) in the system.

System Configuration Parameters

Configures access codes, jamming detection, and operational modes.

Timing Configuration Parameters

Sets timers for exit, bell duration, entry, and full set exit.

Zone Options and System Tests

Configures zone behaviour and initiates system tests.

Defaults and Programming Exit

Restores factory defaults and exits programming mode.

Leaving Programming Mode

Restoring Factory Defaults

Walk Test Procedure

Fault Finding Displays

Fault Finding Displays Continued

User Commands

Keypad User Commands

Lists commands for system control via the keypad.

Remote Setting Device Commands

Lists commands for system control using the remote device.