Scantronic 4603 - User Manual

496368 Issue 1 1 of 12
4600
Installation and User Guide
Compatible Equipment
4601 Long range and short range pendant transmitters
4602 Hand held PA
4603 Programmable transmitter
4604 Contact transmitter
4605 Short range dual channel transmitter
4608 PIR
4609 Smoke detector
7150 Viper radio vibration detector (supplied by Weyrad Elec-
tronics).

Summary

Introduction

Technical Specification

Electrical Specifications

Covers input voltage, protection features, battery backup, auxiliary output, dimensions, weight, humidity, and operating temperature.

Wiring

Programming

Programming Detectors

Explains using DIL switches for site codes to identify systems and avoid interference.

Initial Power-Up

Entering Programming Mode

Programming Commands

Defaults

Lists default settings like engineering access code (7890) and user access code (1234).

Engineering Program Commands

Zone Configuration

Defines zone types such as Entry/Exit, Part Set, Auto Restore, PIR, PA, and Fire.

Timer Settings

Configures timers for bell duration, entry, and full set exit.

System Tests

Includes tests for jamming detection, bell, strobe, and panel sounder.

Defaults and Exit

Covers loading factory defaults and leaving the programming mode.

Leaving Programming Mode

Restoring Factory Defaults

Walk Test

Fault Finding

Common Fault Displays

Interprets LED indicators for low battery, jamming, tamper, and zone status.

Advanced Fault Indicators

Details LED patterns for remote transmitter issues and mains/battery power failures.

User Commands

Keypad Operations

Lists user commands for full set, unset, part set, omit zones, reset, and code changes.

Remote Setting Device Operations

Describes commands for full set, unset, and PA using the 4605UK-55 device.

Scantronic 4603 Specifications

General

Brand	Scantronic
Model	4603
Category	Security System
Language	English