To Next PageTo Next Page
Need help?Do you have a question about the Scantronic 8136UK-50 and is the answer not in the manual?
General| Frequency | 868MHz |
|---|---|
| Zones | 50 |
| User Codes | 50 |
| Security Grade | Grade 2 |
| Type | Hybrid Alarm Control Panel |
| Power Supply | 230VAC |
Details the 931 low profile keypad and its controls.
Details the 930 low profile keypad, same PCB as 931.
Covers operating temperature, humidity, dimensions, and weight.
Details system power supply usage and output protection.
Explains the process of programming a unique identification number.
Details enabling/disabling sounder, back-light, and keys.
Explains FSL zone wiring with resistors for supervision.
Details connections for typical external sounders (SAB).
Explains wiring for IDIS expander cards and detectors.
Details connecting plug-on communication devices.
Explains system startup procedure with battery or mains.
Details the specific sequence for powering up with mains.
Explains how to abandon or undo changes during programming.
Details the method for inputting text via keypad.
Explains how to perform an engineer reset without removing the lid.
Details restoring user and installer codes to factory defaults.
Explains the process to reset the entire system to default settings.
Explains the call-out feature for ICB lines.
Introduces the section for troubleshooting system issues.
Lists common faults like keypad response and tone issues.
Explains errors detected during configuration checks.
Lists error messages related to FSL loop resistance.
Lists error messages for IDIS modules and sensors.
Discusses methods to reduce voltage drop in IDIS loops.
Explains the process of adding power supply units to IDIS loops.
