Sceptre E27 User Guide

SCEPTRE E27 Page9
Opening the Package
The SCEPTRE E27 LED monitor is packaged in a carton together with standard accessories. The weight of the LED
display is approximately 12.61 lbs. Since the LED panel can be easily scratched or broken, please handle the
product gently. Never place the unit on a surface with the glass facing downwards unless it is on a protective padding.
When opening the carton, make sure the product is in good condition and that all the standard accessories and items
are included. After unpacking your LED monitor, be sure to save the original box and all packing materials for future
shipping needs.
Package Contents

Monitor Display x 1

Base x 1

User Manual x 1

Power Cord x 1

VGA Cable x 1

HDMI Cable x 1
Installing or Uninstalling the Base
1. Please place the base on a flat surface (i.e. table). Hold the monitor directly 90 degrees above the base.
Connect the monitor to the base by inserting the monitor into the base. To remove the base simply look at the
bottom of the base and unlock the two buckles at the bottom of the base.

Sceptre E27 Specifications

General

Brand	Sceptre
Model	E27
Category	Monitor
Language	English