www.schaerer.com
30
BASCA - EN
Version 06 01.2010
product test
restart required
Product can only be tested by a qualified service technician! ►
select grinder
grinder right
Parameter can only be changed by a qualified service technician! ►
powder quantity
9.0 g.
+
Range: 4.0 – 16.0 gram
Quantity of coffee powder (max.: 14.0 gr.; depending on the type of grind) ►
strokes per button
01
Parameter can only be changed by a qualified service technician! ►
water quantity
40 ml
+
Range: 10 – 600 ml
Quantity of the coffee water ►
bypass water
0.0 s.
+
Appears only if the machine is equipped with the option by pass!
Range: 0.0 – 30.0 seconds
Quantity of the by pass water ►
initial pressure
level 4
Parameter can only be changed by a qualified service technician! ►
pre-infuse
10 ml
Parameter can only be changed by a qualified service technician! ►
delay pre-infuse
1.0 s.
Appears only if the parameter pre-infuse is programmed higher then 00 ml!
Parameter can only be changed by a qualified service technician! ►
chamber opening time
1 ms
Parameter can only be changed by a qualified service technician! ►
2 x grind quantity
14.0 g.
+
Appears only if the parameter dispensing mode is programmed to “double product”!
Range: 4.0 – 16.0 gram
Quantity of coffee powder (max.: 14.0 gr.; depending on the type of grind) ►
2 x initial pressure
level 1
Appears only if the parameter dispensing mode is programmed to “double product”!
Parameter can only be changed by a qualified service technician! ►