www.schaerer.com
34
BASCA - EN
Version 06 01.2010
product test
restart required
Product can only be tested by a qualified service technician! ►
hot milk time
15.0 s
+
Range: 0.0 – 40.0 seconds
Duration of hot milk output ►
product buttons
product buttons
► To access a menu, see “Programming overview: CHEF card”, page 23
select product
< press button >
BB
Select the desired product (for which the parameters are to be set) ►
select product
milk foam
The product type can only be changed by a qualified service technician! ►
counted products
1
Parameter can only be changed by a qualified service technician! ►
dispensing mode
start/stop
Parameter can only be changed by a qualified service technician! ►
Product output can be stopped by pressing the product button again ►
product test
restart required
Product can only be tested by a qualified service technician! ►
foam time
10.0 s
+
Range: 0.0 – 40.0 seconds
Duration of milk foam output ►
product buttons
Product buttons: milk foam