www.schaerer.com
35
BASCA - EN
Version 06 01.2010
product buttons
► To access a menu, see “Programming overview: CHEF card”, page 23
select product
< press button >
BB
Select the desired product (for which the parameters are to be set) ►
select product
hot chocolate
The product type can only be changed by a qualified service technician! ►
counted products
1
Parameter can only be changed by a qualified service technician! ►
output sequence
milk befor
Appears only if the machine is equipped with a milk system!
Parameter can only be changed by a qualified service technician! ►
prod. preselection
yes
Parameter can only be changed by a qualified service technician! ►
dispensing mode
single product
Parameter can only be changed by a qualified service technician! ►
product test
restart required
Product can only be tested by a qualified service technician! ►
chocolate quantity
100 ml
+
Range: 40 – 999 ml
Quantity of the chocolate water ►
rising water quantity
20 ml
+
Range: 40 – 999 ml
Quantity of rinsing water ►
powder quantity
50 %
+
Range: 40 – 999 ml
Quantity of powder ►
hot milk time
0.1 s.
+
Appears only if the machine is equipped with a milk system!
Range: 0 – 40 seconds
Duration of hot milk output ►
Product buttons: Hot chocolate (option powder doser)