EasyManua.ls Logo

Schaltbau M36W - Page 26

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
2017-12-21 / V1.3
Connectors Series M – Installation and Maintenance Instructions
Regular Visual Checks / Functional Checks
Connector element Visual and functional check Measures
Plug Check for:
X
ease of movement when plugging
X
dirt
X
damage or wear and tear on shell, contacts, contact insert
X
damage or wear and tear on grooves / guideways
(e.g. round edges)
X
bent contacts
X
loose or missing fastening elements
X
cracks and ruptured patches
In the case of defects:
X
remove existent dirt (abra-
sion of the contact surface)
without leaving any residue
X
immediately replace dam-
aged parts
Union nut on plug Check for:
X
ease of movement when unscrewing and screwing down
X
dirt
X
damage or wear and tear of the thread
X
cracks and ruptured patches
In the case of defects:
X
remove existent dirt with-
out leaving any residue
X
when the union nut is dam-
aged, immediately replace
the complete plug shell
Receptacle Check for:
X
ease of movement when plugging
X
dirt
X
damage or wear and tear on shell, contacts, contact insert
X
bent contacts
X
damage or wear and tear on grooves / guideways
(e.g. round edges)
X
loose or missing fastening elements
X
damage or wear and tear of the thread
X
cracks and ruptured patches
In the case of defects:
X
remove existent dirt (abra-
sion of the contact surface)
without leaving any residue
X
immediately replace dam-
aged parts
Backshell/strain relief,
shrink boot,
cable gland
Check for:
X
dirt
X
damage or cracks on shell, shrink boot, cable gland
X
loose or missing fastening elements
X
proper fastening and correct tting
X
correct functioning of strain relief
In the case of defects:
X
remove existent dirt with-
out leaving any residue
X
immediately replace dam-
aged parts
Protection caps Check for:
X
ease of movement when unscrewing and screwing down
X
dirt
X
damage or wear and tear on the thread
X
damage or wear and tear on grooves / guideways
(e.g. round edges)
X
worn out fastening cord or damaged plastic clip
X
cracks and ruptured patches
X
damaged sealing ring in protection cap
In the case of defects:
X
remove existent dirt with-
out leaving any residue
X
immediately replace dam-
aged parts

Related product manuals