6
2017-12-21 / V1.3
Connectors Series M – Installation and Maintenance Instructions
Dangers and Security Measures
3.3 Measures for Avoiding Damages
NOTICE
Improper handling of the connector, e.g. when hitting the oor with some impact, can result in breakage, visible
cracks and deformation.
X
Make sure that the connectors are handled appropriately.
X
Carry out regular visual checks to detect possible damages.
X
Replace damaged parts immediately.
3.4 Measures for Avoiding Malfunctions
NOTICE
In the case of damage, wear and tear and/or soiling of the connector components - in the form of a partial break,
sharp edges and discoloured surfaces - the functional safety of the connectors is no longer guaranteed.
X
Carry out regular visual checks to detect wear and tear and dirt.
X
Immediately replace damaged parts.
X
Immediately remove dirt without leaving any residues.
X
Immediately replace parts with stubborn dirt.
NOTICE
Inappropriate handling when plugging or disconnecting may damage the connectors. The functional safety of
the connectors is no longer guaranteed when parts are damaged.
X
Make sure that the guideways and slots of plug and receptacle always interlock when plugging!
X
Take care that plug and receptacle do not tilt and that they are plugged without force.
X
Make sure before the plugging procedure that plug and receptacle as well as the protection caps are not
soiled. Remove existent dirt without leaving any residues.
X
Make sure that in the not mated condition the protection caps are always attached according to regulations.
To Next Page
Loading...