Schaudt IT 96-A - Appendix; Ec Conformity Declaration; Customer Service

Instruction Man u al Instrument Panels IT 96-A, IT 96-2
12
Issued: 26.11.2007 830.636 BA / EN
Appendix
A EC -con f o rmity declaration
Schaudt GmbH hereby confirms that the type of construction of the instru-
ment panel 96 A / 96-2 complies with the following relevant regulations:
Electromagnetic compatibility directive
89/336/EEC with amendments 92/31/EEC
The original EC-conformity declaration is available and can be viewed at any
time.
Schaudt GmbH, Elektrotechnik & Apparatebau
Daimlerstraße 5
88677 Markdorf
Germany
B Special fittings/accessories
Per tank:
1 x rod type tank probe, 1 x seal,
1 x locking nut, 1 x probe cable 5 x 0.5 (optional extras)
Alternative (per tank):
5 x tank sensors, 1 x sensor cable 5 x 0.5
It is also possible to operate tank probes and tank sensors together.
C Customer service
Schaudt GmbH, Elektrotechnik & Apparatebau
Daimlerstraße 5
88677 Markdorf, Germany
Phone: +49 7544 9577-16 Email: kundendienst@schaudt-gmbh.de
Opening hours Mon to Thur 08:00 -- 12:00, 13:00 -- 16:00 hours
Fri 08:00 -- 12:00 hours
Returning a faulty device:
" Fill in and enclose the fault report, see Appendix D.
" Send it to the addressee delivered free.
Manufacturer
Address
Rod type tank probes
Tank sensors
Mixed operation
Customer service
address
Send in device