Scheppach BTS900 User Manual

www.scheppach.com
GB
|
21
Explanation of the symbols on the device
Symbols are used in this manual to draw your attention to potential hazards. The safety symbols and the accompa-
nying explanations must be fully understood. The warnings themselves will not rectify a hazard and cannot replace
proper accident prevention measures.
Warning - read the instruction manual to reduce the risk of injury.
Wear hearing protection.
If dust builds up, wear respiratory protection!
Wear eye protection.
WARNING! Risk of injury! Do not reach into sanding disc while it is running!
Running direction of the sanding belt
Running direction of the sanding disc
m Attention!
We have marked points in these operating instructions that impact your safety with this
symbol.

Scheppach BTS900 Specifications

General

Motor Power	900 W
Belt Size	915 x 100 mm
Disc Diameter	150 mm
Table Size	190 x 125 mm
Weight	18 kg
Power Input	900 W
Disc Speed	2850 rpm
Dust Extraction	Yes
Sanding Disc Diameter	150 mm
Belt Speed	7.5 m/sec