To Next PageTo Next Page
Need help?Do you have a question about the Scheppach CSP50 and is the answer not in the manual?
General| Engine type | 2-stroke |
|---|---|
| Bar length | 45 cm |
| Weight (without bar and chain) | 5.5 kg |
| Engine displacement | 50 cm³ |
| Chain pitch | 3/8 inch |
| Fuel tank capacity | 550 ml |
Identifies individuals prohibited from operating the device due to lack of familiarity, age, or impairment.
Provides general warnings and advice for safe operation, emphasizing attentiveness and avoiding misuse.
Details essential protective gear like helmets, glasses, gloves, and footwear required for safe operation.
Instructions on how to safely store and transport the chainsaw, including safety measures.
Covers regulations on noise, ventilation requirements, and safe working conditions like daylight and weather.
Guidelines for safely refuelling the chainsaw, emphasizing fire prevention and avoiding spills.
Essential checks to perform before starting the engine to ensure safe and proper operation.
Advises on mitigating risks associated with vibration, like white finger syndrome, through breaks and gloves.
Explains kick-back and provides detailed methods to avoid this dangerous reaction.
Provides a table with the correct petrol to 2-stroke oil ratio for mixing fuel.
Instructions for safely filling the fuel tank with the correct fuel mixture.
Instructions for safely filling the chain oil tank to ensure proper lubrication.
Detailed instructions on how to start the engine, covering both cold and warm conditions.
Procedures for safely stopping the engine, including emergency and normal stop sequences.
Guidance on how the saw chain should behave when the engine is idling.
Instructions on how to check and adjust the chain oil supply for proper lubrication.
Procedure to verify the functionality of the chain brake before each use.
General guidelines for safe and effective use and handling of the chainsaw during felling.
Steps for making the initial notch cut to direct the tree's fall.
Details on the depth and angle for the initial fall notch cut.
Procedure to ensure the chainsaw is correctly positioned to check the felling direction.
Instructions for making the main felling cut, including safety precautions for tree fall.
Guidance on how to shorten long branches before the final cut to prevent jamming.
Specific cutting technique for branches that are bent downwards due to tension.
Specific cutting technique for branches that are bent upwards due to tension.
Instructions for cleaning the engine unit, including warnings about hot parts.
Procedure for cleaning the air filter to maintain engine performance.
Steps for cleaning the chain drive components for optimal operation.
Guide to removing, checking, and cleaning the spark plug.
Reference to checking and adjusting the chain lubrication system.
Notes on when carburettor adjustments may be necessary.
Instructions on maintaining the guide bar for optimal performance and longevity.
Detailed steps for correctly mounting and tensioning the saw chain and guide bar.
