www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
23
5. Safety notes
WARNING: When you use electric machines, al-
ways observe the following safety instructions
in order to reduce the risk of re, electric shock,
and injuries. Please read all the instructions be-
fore you work with this machine.
•
the machine.
•
•
not be removed or made useless.
•
• Before putting into operation check the correct
•
vision.
•
•
•
and hands from the splitting tool.
•
machine and disconnect the plug from the power
• Connections, repairs, or servicing work on the
electrician.
•
after completing repair and maintenance proce
dures.
•
chine and disconnect the plug from the power sup
• Removing or working without guards is prohib-
ited.
•
result in hazards such as ejecting parts, splitter
blocking, and crushing.
6. Additional safety instructions
•
son.
• Never split logs containing nails, wire, or other for
eign objects.
•
ous. You can stumble, slip or fall down. Keep the
4. Intended use
misuse. The user / operator and not the manufactur
caused as a result of this.
tions and the operating instructions to be found in
this manual. All persons who use and service the
equipment have to be acquainted with this manual
and must be informed about the equipment’s poten
tial hazards. It is also imperative to observe the ac
The same applies for the general rules of health and
from such changes.
•
zontal and in the direction of the grain. Dimensions
• Never split wood against the grain or while in an
upright position.
•
tenance instructions as well as the technical data
given in the calibrations and dimensions must be
adhered to.
•
must also be adhered to.
•
machine and have been informed about the dan
•
• Keep work area clean and free of obstacles.
•
• Check the proper function of the splitter before
•
1000 m above sea level.
Please note that our equipment has not been de
signed for use in commercial, trade or industri
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
To Next Page
Loading...
